Hitec DPC-10 Bedienungsanleitung PDF herunterladen (Seite 12)

Hitec Brushless Servo PC Programming Interface

DPC-10

DPC-10 Software Operating Manual

Fail Safe Position

Note: Remember to “Write All” your settings to your

servo before closing the DPC-10 software and dis-

connecting your servo. Failure to do so will result in

the loss of your programmed settings.

Section 5

Saving and Loading Files/

Restoring Default Files

With the DPC-10 software you have the ability to

save and load servo parameter files. This is helpful

when needing to set up multiple servos with the

same parameters. The DPC-10 software also has

the ability to restore the factory defaults file in the

event the user setup doesn’t operate correctly. The

following details how to use these features.

Saving Files

Once you have completed your servo setup and

written the setup to the servo, click on “Read Servo.”

Next click on “SAVE” to open the save file dialog box.

Navigate to the location that you want to save your

file to, enter a name for your servo and click “Save.”

You have successfully saved your servo parameters

to a file.

To load a parameter file click on “OPEN”, navigate

to the location where you stored your file and click

“Open.” You will get the “File load has completed”

prompt. Click “OK.” Now click “Write All” to load the

setting onto the servo. Once you get the “Write All

Loading Files

1 2 ... 7 8 9 10 11 12 13

Keine Kommentare

Hitec DPC-10 Bedienungsanleitung Seite 12